ASME Y14.38a-2002 Abbreviations and Acronyms. Revision and Redesignation of ASME Y1.1-1989; Addenda A-2002.
|
ID： |
5D27A9A3804D4D6CBA0098E7803E7B1F |
|
文件大小(MB)： |
1.18 |
|
页数： |
286 |
|
文件格式： |
|
|
日期： |
2009-9-19 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
AN AMERICAN NATIONAL STANDARD,ASME Y14.38a-2002,ADDENDA,to,ASME Y14.38-1999,ABBREVIATIONS AND ACRONYMS,THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS,Three Park Avenue O New York, NY 10016,Date of Issuance: January 31, 2003,ASME is the registered trademark of The American Society of Mechanical Engineers.,This code or standard was developed under procedures accredited as meeting the criteria for,American National Standards. The Standards Committee that approved the code or standard,was balanced to assure that individuals from competent and concerned interests have had an,opportunity to participate. The proposed code or standard was made available for public review,and comment that provides an opportunity for additional public input from industry, academia,regulatory agencies, and the public-at-large.,ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device,or activity.,ASME does not take any position with respect to the validity of any patent rights asserted in,connection with any items mentioned in this document, and does not undertake to insure anyone,utilizing a standard against liability for infringement of any applicable letters patent, nor assumes,any such liability. Users of a code or standard are expressly advised that determination of the,validity of any such patent rights, and the risk of infringement of such rights, is entirely their,own responsibility.,Participation by federal agency representative(s) or person(s) affiliated with industry is not to,be interpreted as government or industry endorsement of this code or standard.,ASME accepts responsibility for only those interpretations of this document issued in,accordance with the established ASME procedures and policies, which precludes the issuance,of interpretations by individuals.,No part of this document may be reproduced in any form,in an electronic retrieval system or otherwise,without the prior written permission of the publisher.,The American Society of Mechanical Engineers,Three Park Avenue, New York, NY 10016-5990,Copyright . 2003 by,THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS,All rights reserved,Printed in U.S.A.,ASME Y14.38a-2002,Following approval by the ASME Y14 Standards Committee, and after public review, ASME Y14.38a-,2002 was approved by the American National Standards Institute on August 8, 2002.,Addenda to ASME Y14.38-1999 are issued in the form of replacement pages. Revisions, additions, and,deletions are incorporated directly into the affected pages. It is advisable, however, that this page, the,Addenda title and copyright pages, and all replaced pages be retained for reference.,SUMMARY OF CHANGES,This is the first Addenda to be published to ASME Y14.38-1999.,Replace or insert the pages listed. Changes given below are identified on the pages by a margin note, (a),placed next to the affected area. The pages not listed are the reverse sides of the listed pages and contain,no changes.,Page Location Change,5–68 Words and Terms and Their (1) Footnotes 1, 2, and 3 added as editorial,Abbreviations revision,(2) See changes (2) and (3) under Cross-,Reference List of Abbreviations and,Their Words and Terms below,69–133 Cross-Reference List of (1) Footnotes 1, 2, and 3 added as editorial,Abbreviations and Their revision,Words and Terms,(2) The following were modified:,deep underwater measuring device,changed to deep underwater nuclear,counter (DUNC does not change),effective focal length (EFL),changed to effective focal length,(EFFL),equivalent focal length (EFL),changed to equivalent focal length,(EQFL),(3) The following were added:,air conditioning (AC),application list (AL),backshell (BKSHL),bi-directional (BIDIR),broadband (BRDB),cable (CBL),card cage (CRCG),center line (CL),Page Location Change,69–133 change in design (CID),commercial and government entity,(code) (CAGE),Controller (CONT),corner (COR),cubic feet per minute (CFM),cubic feet per second (CFS),designer (DES),dots per inch (DPI),double density (DD),double sided (DS),drawing change notice (DCN),electrostatic discharge (ESD),electrostatic discharge sensitive (ESDS),electrostatic sensitive (ESS),exploitation (EXPLTN),firmware (FMW),flagnote (number) (FL),floppy disc (FD),general note (number) (GN),gross combined weight rating (GCWR),hard disc (HD),hybrid microelectronic assembly (HMA),illustrated parts catalog (IPC),indentured data list (ID),line replaceable unit (LRU),local area network (LAN),megabyte (MEG),microcircuit (MCKT),missile boat tail (MSLBT),national stock number (NSN),notice of revision (NOR),photo contact master (PCM),places (PL),polypropylene (PP),producibility engineering and planning,(PEP),re……
……